Garage Packages
  ·Installation available

Deck Packages
  ·Variety of sizes
  ·Installation available 		Cattle Feeders
  ·Available from 16' - 24'

Metal Clad Fencing
  ·Wood or steel frame



Grain Storage Unit

VERSATILE
  • Designed to cover a filled plywood storage unit or steel ring.
  • Other uses include: oilfield pit liners, environmental protection liners, pond liners, etc.
  • Fabrics: for any use imaginable, any color, any texture from meshing to canvas tents to clear window material.
SUPERSTRONG
  • Constructed from super tough reinforced woven poly fabric c/w high UVI treatment.
EASY TO INSTALL
  • Reinforced grommets at 3’ intervals around rope hem. Tie down rope supplied.
  • Steel Ring Covers have a hold down rope over the peak.
TOP QUALITY WORKMANSHIP
  • All seams, except one joiner seam, are heat sealed for complete water proof ness.
  • Available in three weights for extended protection.
  • All sewing with rot proof polyester thread.
VENTED
  • Vented at top to allow moisture to escape.
LOW COST
  • A fraction of the cost compared to other kinds of storage.
COMPLETE UNITS AVAILABLE
  • Wood or steel rings with fabric and tie downs.



Polyfabric Hay Covers

  1. Heavy reinforced super tough poly fabric 200 lb/in, tensile strength. Special treatment for long outdoor life. Beware of inferior fabrics.
  2. Rope is encased in the hem and a spur eyelet is set into 5 layers of material to give 500 lbs. of pull per eyelet. Webbing hook gives 535 lbs. per loop strength.
  3. Silver/Grey on outside to reflect light and black on inside to prevent greenhousing.
  4. Versatile hem is designed for both pipe insertion and other conventional systems like rope, spiral pins, etc. See “Some Suggested Tie Down Methods”



Roll Tarps

PATENTED SPRING RETURN SYSTEM
  • Tarp return system proven dependable over 10 years.
LATCH PLATE (Optional)
  • Roller completely locks under ledge
  • Rolled edge for longer tarp life
  • Rigid design
  • Aluminum (rust proof) material
  • Spring in ledge helps keep tarp tight
QUICK OFF TARP STOPS (Optional)
  • Twenty-one tooth splined U joint (standard on all tarps).
  • The spline U joint allows for quick adjustments for tarp tightness
  • The Quick Off tarp stop is removed by just pulling one pin.
  • Fabric and roller pipe are off in seconds.
INSTANT MINOR ADJUSTMENTS (Standard)
  • Tarp tension are made possible with this crank bracket. Adaptable to being installed on either side of the box. The crank handle is a two piece telescopic design that adjusts to the height of your box. Spring loaded pin holds handle in place.
CHAIN-HOOK SYSTEM (Standard)
  • Hook and lock in one motion.
  • No hardware on top of box to get damaged or interfere with stock racks.
  • No expensive aluminum to replace (about $7.50 per ft)
  • Ridge pole to keep tarp evenly taut.
  • Adjustable height on hooks allows you to take out slack areas in tarp.
  • New hook fastens only to top rim of truck box.




Other Covers and Accessories
  • PE Repair Kits
  • PVC Repair Kits
  • Auger Motor Cover
  • Auger Motor Cover





Design and Hosting by: 20/20 Website. Copyright © 2002-05 A1 Structures. All rights reserved.